Mark 4 Gondola Shelving System: Sizes and Options

Selec the Mark 4 Gondola Specifications to suit your business.

There is a Mark 4 Gondola Shelving option for every business.

  • Single or Double Sided Units
  • Wide or Narrow Aisle 
  • Single Bays or Joined Bays to create Aisles of Shelving
  • Heights from 1500mm to 2100mm
  • Bay Lengths of 900mm or 1200mm
  • Punched Metal Pegboard Back Panels in Flat or "Volcano-style" to suit different types of display hooks.
  • Choice of two popular colours
  • Large range of compatible accessories including Front and Side Fences, Display Hooks, Display Bins

Copy of Upright Posts for the RT Gondola Shelving System

!

Select from a range of heights to suit your requirements.

There are two types of Upright Posts: High Profile ("H"-Leg) or Low Profile ("T"-Leg). Both are available for single or double sided units.

Upright Posts

Manufactured from 50mm diameter round steel tube.

These posts are punched on one side (for single sided units) or two sides (for double sided units). The Infill Panels and the Shelf Brackets clip in to these slots.

The pitch, or distance from the top of one slot to the top of the next slot is 50mm.

All Upright Posts include levelling feet to accommodate uneven floors


 

High Profile ("H"-Leg) Upright Posts:

Nominal Heights*

1250mm
1400mm

1550mm
1700mm
1850mm
2150mm

Nominal Depths*

300mm
350mm

400mm
450mm
500mm

 

Low Profile ("T"-Leg) Upright Posts:

Nominal Heights*

1300mm
1450mm
1600mm

1750mm
1900mm
2050mm
2200mm

Nominal Depths*

300mm
350mm

400mm
450mm
500mm

Nominal Heights*
The total height of the Upright Post excluding the Levelling Feet.
 
Nominal Depth*
The depth of the horizontal leg excluding the thickness of the Upright Post. The Nominal Depth is the same as the Nominal Depth of the Base Steel Shelves that sit on the leg.

Copy of Infill Panels for the RT Gondola Shelving System

!

Infill panels (that is, the Back Panels) are available in the following sizes:

Widths: 900mm and 1200mm

Heights: 300mm, 450mm and 600mm. MIx these panel heights to match the heights of the Upright Posts.

Select from 4 options for the Infill Panels:

Plain Metal Infill Panels

Infill panels clip into the punched Upright Posts without the need for special tools. They are made from 1mm sheet steel powdercoated in a colour of your choice.

Plain Metal Infill Panels are the most commonly specified type. They are largely decorative but help stop your stock falling off the back of the shelves particularly in double sided units.

Flat Punched Metal Pegboard Infill Panels

Flat sheet metal panels with pegboard style punchings are designed accept older style pegboard hooks and accessories. They are punched with 5mm diameter holes on a 25mm by 25mm grid pattern.

Pegboard Infill Panels are specified for RT Gondola Shelving that is used to display a combination of shelved and hang-sell stock.

'Volcano' Style Punched Metal Pegboard Panels
These are similar to the Flat version but are compatible with newer styles of Pegboard Hooks.

No Infill Panels

This option uses Top and Bottom Horizontal Rails to join the Upright Posts. These Rails clip into the Upright Posts without the need for special tools. Although suitable for some merchandise types (for example, larger items, baskets or bookshelves) they are not recommended for most applications mainly because you stock may fall off the back of the shelves.
   

Copy of Shelves for the RT Gondola Shelving System

!

Select from styles to suit all merchandising needs:



Plain Sheet Steel Shelves

Plain sheet metal shelves are made from 1mm sheet steel and have a 30mm fold-down lips. Larger shelf sizes are reinforced underneath for added strength. Powdercoated in your choice of colour.

Widths: 900mm and 1200mm

Depths: 300mm, 350mm, 400mm, 450mm and 600mm.


Slotted Sheet Steel Shelves

Sheet metal shelves are made from 1mm sheet steel and have a 30mm fold-down lips. They are slotted for use with wire shelf fronts and shelf dividers. Larger shelf sizes are reinforced underneath for added strength. Powdercoated in your choice of colour.

Widths: 900mm and 1200mm

Depths: 300mm, 350mm, 400mm, 450mm and 600mm.

 

Shelf Support Frames

These are unique to the Rt Gondola Shelving System. They are available in rectangular styles (for the main gondola shelving) or curved for the Feature End Frames.

 

Shelf Types

The Shelf Support Frames can be used with Glass or Melamine Shelves.

Copy of Colours and Finishes for Mark 5 Gondola Shelving System

!

Mark 5 Gondola Shelving is Australian made and is manufactured to your specifications. Unlike the lesser quality, Asian-made shelving sold by some businesses, Mark 5 Shelving is not limited to one or two basic colours like white, grey or beige that resemble warehouse shelving.

Select from over 125 different Dulux powdercoat colours that include gloss, satin, matt, metallic pearl and ripple textures.

To find out more about powdercoat finishes and the Dulux colour range click here.

Copy of Related Pages

!

For more information on the RT Gondola Shelving System click on the blue page links below:

 

About RT Gondola
Shelving System

RT Gondola Shelving
Colours and Finishes

BUY RT Gondola
Shelving

Image Gallery
RT Gondola Components

 

 

 

 

Image Gallery
RT Gondola Components