Mark 5 Gondola Shelving: Sizes and Options

Select from a range of basic components.

  • Single or double sided Upright Posts.
  • Range of widths, lengths and depths to suit any application.
  • Plain sheet metal or wire mesh shelves.
  • Plain, punched metal (pegboard), louvre or Slatwall infill panels.

Custom manufactured in a range of colours.

Add any of the Mark 5 Accessories to complete your display.

Upright Posts for Mark 5 Gondola Shelving System

!

Select from High Profile ("H"-Leg) or Low Profile ("T"-Leg) Upright Posts - single or double sided - in a range of heights and depths. Manufactured from 60x30mm steel tube with slot punchings on a 50mm pitch.


High Profile ("H"-Leg) Upright Posts:
Nominal Heights (H)* 1250mm
1400mm
1550mm
1700mm
1850mm
2150mm
2300mm
2450mm
2600mm
2750mm
2900mm
3200mm
Nominal Depths (D)* 250mm
300mm
350mm
400mm
450mm
500mm
550mm
600mm
   
Low Profile ("T"-Leg) Upright Posts:
Nominal Heights (H)* 1110mm
1410mm
1560mm
1710mm
2010mm
2160mm
2310mm
2610mm
3210mm
Nominal Depths (D)* 250mm
300mm
350mm
400mm
450mm
500mm
550mm
600mm

Nominal Heights (H)*
The total height of the Upright Post excluding the Levelling Feet.
 
Nominal Depth (D)*
The depth of the horizontal leg excluding the thickness of the Upright Post. The Nominal Depth is the same as the Nominal Depth of the Base Steel Shelves that sit on the leg.

Infill Panels for Mark 5 Gondola Shelving System

!

Select from 5 types of infill panels in a range of modular sizes to suit any height shelving units

Punched Sheet Metal Pegboard Infill Panels

Description: Sheet metal panels with 'volcano'-style punchings to accept standard pegboard hooks and accessories. These panels clip into the punched Upright Posts without the need for special tools. Specified for displays that is a combination of shelved and hang-sell stock.
Specifications: 1mm sheet steel. Powdercoated. With 5mm punchings on 25x25mm grid.
Standard Sizes: Widths: 900mm, 1200mm
  Heights:  300mm, 450mm, 600mm
  MIx these panel heights to match the heights of the Upright Posts.
    
 Plain Sheet Metal Infill Panels

 

 

 

Description: Plain sheet metal panels. Generally specified for displays that are mostly shelved stock. Also used to prevent stock falling off the back of the shelves. These panels clip into the punched Upright Posts without the need for special tools.
Specifications: 1mm sheet steel. Powdercoated.
Standard Sizes: Widths: 900mm, 1200mm
  Heights:  300mm, 450mm, 600mm
  MIx these panel heights to match the heights of the Upright Posts.
     
 Punched Metal Louvre Panels

 

 

 

Description: Sheet metal panels with special 'louvre' punchings to carry most types of plastic small parts storage containers. These panels clip into the punched Upright Posts without the need for special tools. For more information on plastic storage containers click here.
Specifications: 1mm sheet steel. Powdercoated.
Standard Sizes: Widths: 900mm, 1200mm
  Heights:  300mm, 450mm, 600mm
  MIx these panel heights to match the heights of the Upright Posts.
    
 No Infill Panels

 

 

 

Description: Uses Top and Bottom Horizontal Rails to join the Upright Posts. These Rails clip into the Upright Posts without the need for special tools. Typically specified for applications using baskets or bookshelves.
Specifications: 2mm sheet steel blade with 1mm capping. Powdercoated.
Standard Sizes: Widths: 900mm, 1200mm
  Other sizes custom manufactured to suit specific applications.
   
Slatwall Panel Infills

 

 

 

Description:

Slatwall panels are manufactured from solid panels of medium density fibreboard.  Precision-machined T-profile grooves run horizontally and provide the means of attaching the display accessories. The accessory range includes more than 100 different items including shelf brackets, clothing arms, bins and hang-sell prongs. For more information on Slatwall  click here.  

Specifications:

Standard Slatwall board thickness is 18mm. Standard groove separations are 75mm and 100mm

Standard Sizes: Standard Widths: To suit the standard bay widths of 900mm, 1200mm
  Heights:  Up to 2400mm to suit the application
    

Infill Panel Selection Chart for Mark 5 Gondola Shelving System
Use this table to detirmine the quantity of Plain, Punched Metal Pegboard or Punched Metal Louvre Panels required for a particular Upright Post Height.
 
For Mark 5 "H"-Leg Upright Posts:

 Nominal Overall
Height of Post

 Quantity of Panels Per Side
(Multiply by 2 for Double Sided)

 (Excludes Levelling Feet)

 600mm H

 450mm H

 300mm H

 3200mm

 5

 x

 x

 2900mm

 4

 x

 1

 2750mm

 3

 1

 1

 2600mm

4

 x

 x

 2450mm

3

 1

 x

 2300mm

3

 x

 1

 2150mm

 2

 1

 1

 1850mm

2

 1

 x

 1700mm

 3

 x

 1

 1550mm

 1

 1

 1

 1400mm

 2

 x

 x

 1250mm

 1

 1

 x

  
 
For Mark 5 "T"-Leg Upright Posts:

 Nominal Overall
Height of Post

 Quantity of Panels Per Side
(Multiply by 2 for Double Sided)

 (Excludes Levelling Feet)

 600mm H

 450mm H

 300mm H

 3210mm

 4

 1

 1

 2610mm

 3

 1

 1

 2310mm

 3

1

x

 2160mm

 3

 x

 1

 2010mm

 2

 1

 1

 1710mm

 2

 1

 x

 1560mm

 2

 x

1

 1410mm

 1

 1

 1

 1110mm

 1

 1

 x

 

Shelves for Mark 5 Gondola Shelving System

!

Select from styles to suit all merchandising needs:

Slotted Sheet Metal Shelves

 

 

 

Description: Sheet metal shelves with 30mm fold-down lips. Larger shelf sizes are reinforced underneath for added strength.
Specifications: 1mm sheet steel. With slots to accept wire shelf fronts and dividers. Powdercoated.
Standard Sizes: Widths: 900mm, 1200mm
  Depths:  250mm, 300mm, 350mm, 400mm, 450mm, 500mm, 550mm, 600mm.
   
Plain Sheet Metal Shelves

 

 

Description: Sheet metal shelves with 30mm fold-down lips. Larger shelf sizes are reinforced underneath for added strength.
Specifications: 1mm sheet steel. Powdercoated.
Standard Sizes: Widths: 900mm, 1200mm
  Depths:  250mm, 300mm, 350mm, 400mm, 450mm, 500mm, 550mm, 600mm.
   
Wire Mesh Shelves
 

 

 
Description: Wire mesh shelves. Tougher, easier to keep clean (dust falls through the mesh) and allows light through to the shelves below. Typically specified for supermarkets and computer shops.
Specifications: 4mm thick wire frames with 2mm thick wire for the main shelf. Wires are speced on 20mm or 12mm centres to suit the application. Typically supplied with chrome finish but can be powdercoated.
Standard Sizes: Widths: 900mm, 1200mm
  Depths:  250mm, 300mm, 350mm, 400mm, 450mm, 500mm, 550mm, 600mm.
  
Wire Baskets and Dividers

 

 

Description: Wire baskets with optional dividers
Specifications: 4mm thick wire frames with 2mm thick wire mesh. Typically supplied with chrome finish but can be powdercoated.
Standard Sizes: Widths: 900mm, 1200mm
  Depths: 
   
Metal Trays

    

 

 
Description: Sheet shelving with adjustable sheet metal dividers. Designed for storage and display of loose, small parts and merchandise.
Specifications: 1mm sheet steel. Powdercoated.
Standard Sizes: Widths: 900mm, 1200mm
  Depths:  To suit the application.
    

Colours and Finishes for Mark 5 Gondola Shelving System

!

Mark 5 Gondola Shelving is Australian made and is manufactured to your specifications. Unlike the lesser quality, Asian-made shelving sold by some businesses, Mark 5 Shelving is not limited to one or two basic colours like white, grey or beige that resemble warehouse shelving.

Select from over 125 different Dulux powdercoat colours that include gloss, satin, matt, metallic pearl and ripple textures.

To find out more about powdercoat finishes and the Dulux colour range click here.